 |
|
|
| Fans
| CO2 Controllers | Carbon
Filters and Ozone |
| Thermostats |
|
|
Plug
and Grow iGS-020 |
| Day/Night
Temperature Controller |
| IGS-020 |
|
|
| Day/Night
Temperature Controller |
 |
|
This electronic module controls a 120V (15A, 1HP) heating
or cooling equipment in accordance to a user adjustable day
and night setpoints
The ambient temperature value is displayed on the luminous
bargraph
The differential of operation is adjustable
|
|
| Humistats |
|
|
Plug
and Grow iGS-030 |
| Day/Night
Relative Humidity Controller |
| IGS-030 |
|
|
| Day/Night
Relative Humidity Controller |
|
|
This electronic module controls a 120V (15A, 1HP) humidifying
or dehumidifying equipment in accordance to a user adjustable
day and night setpoints
The ambient relative humidity value is displayed on the
luminous bargraph
The differential of operation is adjustable
|
|
| Combination
Thermostat / Humistats |
|
|
Plug
and Grow iGS-040 |
| Cooling/Dehumidifying
Controller |
| IGS-0400 |
|
|
| Cooling/Dehumidifying
Controller |
|
|
This electronic module controls a 120V (15A, 1HP) dehumidifying
and cooling equipment (i.e. exhaust and inlet fan, cooler
unit, …) in accordance to user adjustable day and night
temperature and relative humidity setpoints
The ambient temperature and relative humidity values are
displayed in real time on the luminous bargraph
A low temperature limit can be set to prevent excessive
cooling in high humidity conditions
|
|
|
|
|
Plug
and Grow iGS-110 |
| Temperature
and Humidity Smart Controller |
| IGS-110 |
|
|
| Temperature
and Humidity Smart Controller |
|
|
This electronic module controls the heating or cooling and
the humidifying or dehumidifying equipment to maintain user
day and night temperature and humidity setpoints in your grow
room
Multiple modes of operation are possible thus responding
to variable set-up possibilities
Each output can be set to operate during the day only, the
night only or day and night
|
|
|
|
|
Plug
and Grow iGS-220 |
| CO2,
Temperature, and Humidity Smart Controller |
| IGS-220 |
|
|
| CO2,
Temperature, and Humidity Smart Controller |
|
|
This electronic module performs control over CO2 enrichment
or venting, heating or cooling and humidification or dehumidification
equipment to maintain user CO2, temperature and relative humidity
day and night setpoints
The control unit logs the last 24hr minimum, maximum and
average values for the user to scan through. A dry contact
triggers when temperature or relative humidity values are
not within user-specified limits or when a power outage is
at hand
Different operation modes can be set to comply with diverse
set-ups
Each output can be set to operate during the day only, the
night only or day and night
|
|
